Building Plastics Wales Limited

Categories

Useful Information







  Home > Dry Verge > Manthorpe Smart Verge System >

Smart Verge Unit Left Hand Brown

Smart Verge Unit Left Hand Brown


 
List Price: £4.38 (£5.26 inc VAT)
Price: £2.57 (3.08 inc VAT)
Connect with Us


Availability: Order Before Midday for Sameday Dispatch*
Product Code:
MAN-GDV-LHBR
Qty:

Product Description Delivery Information Installation Guide
 

Manthorpe Smart Verge

The Manthorpe Interlocking Dry Verge Product is a quick and efficient way of finishing the verge of the concrete tiled roof. The Dry Verge System works with nearly every make and profile of concrete interlocking tiles and it is completely easy to maintain. The machine could be robotically fixed in most climate conditions without resorting to mortar. The Tilted or Round Ridge Finish Cap may be used to safeguard the finish from the ridge as the Eaves Closure closes the bottom of the verge stopping access for wild birds and enormous bugs. The sleek appearance from the product keeps the walked appearance from the verge while remaining inconspicuous towards the original roof design.

Read More

Product Codes
Dry Verge Unit (Right Hand) MAN-GDV-RH
Dry Verge Unit (Left Hand) MAN-GDV-LH

Manthorpe Smart Verge Units from Building Plastics

Discription

The Manthorpe Dry Verge System provides an attractive finish to the verge detail for most makes and profiles of Concrete Interlocking Tiles laid between 280mm and 345mm batten gauge.

The Verge Units can be easily fitted to each tile in succession. The system is mortar-free and can be fixed in all weather conditions. Once fitted they are weatherproof and maintenance free.

The Manthorpe Dry Verge is available in Terracotta, Dark Brown, Slate Grey and Brown to compliment any variation of roof design. The Dry Verge system preserves the ‘stepped’ appearance of the roof tiles while maintaining the continuous line on the underside of the verge.

References:
BSI: British Standard 5534:2003
BSI: British Standard 6399-2:1997
NHBC Standards Chapter 7.2 Pitched Roofs

Guidance:

Each Dry Verge Unit should be fixed using aluminum or stainless steel, 3.35mm shank diameter spiral roll or annular shank nails, 38mm in length (these are not provided).

The Manthorpe Dry Verge Units can be fixed directly to the end of the tiling battens or used in conjunction with an additional refurbishment batten to avoid the need for raking a mortar bedded verge. (See Fitting Instructions).

At the eaves, each run of Dry Verge units should be closed off at the bottom using the Manthorpe Eaves Closure Pack (Product Code: GDV-EC) to prevent the ingress of birds and large insects.

At the ridge, the Manthorpe Angled or Round Ridge End Cap (Product Code: GDV-END-A or GDV-END-R) should be used to prevent the ingress of birds and large insects.

At a top edge abutment or similar, a lead flashing should be dressed over the tail of the top verge unit. The length of flashing will be dependent on the rafter pitch.

Note: Suitable for 25mm thick battens only.

BATTEN GAUGE COMPATABILITY 280mm to 345mm
ROOF PITCH COMPATABILITY 15° to 55°
MATERIAL Unplasticized Polyvinyl Chloride (uPVC)
MANUFACTURING PROCESS Injection Moulded
Features & Benefits
  • Easy to fix and maintenance free.
  • Suits most makes and profiles of concrete interlocking tiles that have a batten gauge between 280mm and 345mm.
  • Mortar-free solution allows fixing in all weather conditions.
  • Prevents entry of birds and large insects.
  • Suitable for new build or refurbishment situations on roofs of 15° to 55° pitch. Complies with BS 5534 requirements for mechanical fixing.


Browse for more products in the same category as this item:

Dry Verge
Dry Verge > Manthorpe Smart Verge System
Dry Verge > Manthorpe Smart Verge System > Manthorpe Dry Verge Brown