Small 76mm Half Round Gutter System from Floplast is the solution to small
garden buildings where modern and traditional gutter systems look out of place
due to the size. Mini Guttering is growing more and more in popularity
throughout the Uk and the range is growing rapidly. The half round small gutter
uses a 50mm pipe and a wide variety of fittings are available.
Floplast Rainwater systems is manufactured to BS EN 604
Sending orders placed online
Building Plastics (Wales) Ltd deliver all over the UK and Ireland using
our own vehicles and specialist courier companies. Our aim is to dispatch
all orders received before 2pm the same working day (Mon-Fri) on a overnight
delivery service. Any orders placed after this time, will be dispatched the
following working day. If you require your order sooner and have missed our
deadline please contact us on
01495 221630 and we will do our very best to help you out. We also
provide a same day delivery service within 20 miles of our depot subject to
Delivery Methods Explained
Orders within 10 miles of our depot will be delivered FREE OF
for a list of areas please see our delivery information
These are items below 1 metres in length. For example, Loft Doors,
Fittings, Dry Verge Units etc. If you require items that we would be able to
send through the standard royal mail, please phone us on 01495 221630 and we
will be happy to take your order over the telephone. We are able to send
items in the royal mail all over the UK at a low cost.
Below 3 metres in length
These are items below 3 metres in length but above 1.5 metres. For
example Skirting Boards, Interior wall cladding, shower panels et
Above 5 metres in length
These are any items above items above 3 metres in length.
Prices quoted for delivery are subject to VAT
CollectionCollection is Free of charge, please choose Collect in store and we will have it ready for you to collect.
If you have any queries regarding delivery please do not hesitate to contact.
Guttering Installation Guide Step by step with Pictures
To position the running outlet accurately, hold a
plumb line against the fascia directly over the drain.
Mark the position on the fascia with a pencil.
Fit the outlet no more than 50mm below the level of
the roof tiles.
Fit a fascia bracket just below the top of the
fascia board at one end of the run of guttering (opposite end of the
Tie a plumb line (string) around the base of the
Stretch the plumb Line from the bracket along the
fascia board and tie it to the outlet.
Using a spirit level, check that there is a fall
towards the outlet (1.350 is recommended) to encourage water to
Mark the position of the fascia brackets, spacing
them no more than 800mm apart (600mm in areas of heavy snowfall) and
no more than 150mm from any angle or stopend.
Fix the rest of the fascia brackets
RECOMMENDED: Use two 25mm brass or zinc screws when fitting fascia
Starting at the outlet, fit the first length of
gutter using the �back to front� rule (see below).
Fit a union bracket at the other end of the first
length and screw it into the fascia, then fit the next length of
gutter into it.
Continue joining lengths.
Make sure all joints line up with the insertion
depth marked in the fittings.
�Back to Front� Rule: Tilt the gutter to fit under the back clip
and snap in at the front.
Downpipe Installation Guide Step by Step with pictures
Hold a downpipe clip centrally over the line and
mark the fixing holes on the wall with a pencil.
Repeat down the wall, spacing pipe clips no more
than 1.8m apart.
Drill the fixing holes.
RECOMMENDED: Use wall plugs when fitting pipe clip screws to
ensure that the application is secure.
Working from the top downwards, install the
downpipe. If additional lengths of downpipe are required, join using
a socket and pipe clip
Leave a 10mm gap between the end of the pipe and the
bottom of the pipe socket to allow for expansion.
Fix a pipe clip over the joint.
Fit the pipe clips to the downpipe and screw them
into the wall.
RECOMMENDED: Secure pipe/socket clips with two 30mm screws.
Fit the shoe at the bottom of the downpipe so that
it directs water into the drain, if required.
Secure the joint with a pipe clip.
Fitting instruction supplied by Floplast
For use on
small roof areas, such as Sheds, Conservatories, Greenhouses and Carports.
and Fittings with 50mm Downpipe and fittings.
White, Black, Brown and Grey
Building Plastics (Wales) Limited, Unit 1, Block E, Penmaen Industrial Estate, Pontllanfraith, Blackwood. NP12 2DQTelephone : 01495 221 630
Incorporated in England and Wales. Company No 07681432 VAT No GB 191 9222 96