Our Delivery Services Explained

Sending orders placed online

Building Plastics (Wales) Ltd deliver all over the UK and Ireland using our own vehicles and specialist courier companies. Our aim is to dispatch all orders received before 2pm the same working day (Mon-Fri) on a overnight delivery service. Any orders placed after this time, will be dispatched the following working day. If you require your order sooner and have missed our deadline please contact us on 01495 221630 and we will do our very best to help you out. We also provide a same day delivery service within 20 miles of our depot subject to demand.

Our Delivery Methods Explained

Local Deliveries
Orders within 10 miles of our depot will be delivered FREE OF CHARGE for a list of areas please see our delivery information chart

Small Items
These are items below 1 metres in length. For example, Loft Doors, Fittings, Dry Verge Units etc. If you require items that we would be able to send through the standard royal mail, please phone us on 01495 221630 and we will be happy to take your order over the telephone. We are able to send items in the royal mail all over the UK at a low cost.

Items Below 3 metres in length
These are items below 3 metres in length but above 1.5 metres. For example Skirting Boards, Interior wall cladding, shower panels et c

Items Above 5 metres in length
These are any items above items above 3 metres in length.

1. Trim out a suitable opening and fix noggins spanning between trusses to form a clear opening of 726mm x 562mm
2. Fit a layer of 10mm plasterboard 95mm up the edge of the joist. This leaves an opening of 706mm x 542mm.
3. The ceiling should preferably be fully finished and painted before installation of the unit. Offer up the door and frame in the open position ensuring it sits squarely and flush against the ceiling. Use 50mm long woodscrews to secure the frame through the 16 no. pre punched holes. Finally seal around the join between the frame and ceiling using a fire resistant mastic.
4. Close the door and lock the catch use the ‘T’ key provided.