The Manthorpe SmartVerge® Linear Dry Verge System is a fast and effective,
maintenance free method for finishing the verge of a roof.
The Linear Dry Verge System can be mechanically fixed in all weather
conditions without the need for mortar. It is compatible with many types of roof
coverings including Fibre Cement Slates, Natural Slates and Interlocking Plain
The Angled or Round Ridge End Cap can be used to protect the end of the ridge
while the Fixing Clips and Verge Unions allow shorter sections of the Linear
Verge Units to be fixed to the verge and joined together.
The sleek appearance of the product maintains the clean line of the verge
while remaining unobtrusive to the original roof design
The Linear Verge Units can be easily fitted to the verge of the roof
in succession, locking the tiles in place to prevent wind uplift
problems. The system is mortar-free and can be fixed in all weather
conditions. Once fitted they are completely weatherproof and maintenance
The SmartVerge® Linear Dry Verge System is available in Slate Grey,
Black, White, Terracotta and Dark Brown to compliment any variation of
roof design. The Linear Dry Verge System preserves the continuous line
of the verge, providing a neat and attractive finish.
Illustration shows left and right verge units as viewed from
outside the building.
Note: careful attention should be taken when specifying 'left' and
Sending orders placed online
Building Plastics (Wales) Ltd deliver all over the UK and Ireland using
our own vehicles and specialist courier companies. Our aim is to dispatch
all orders received before 2pm the same working day (Mon-Fri) on a overnight
delivery service. Any orders placed after this time, will be dispatched the
following working day. If you require your order sooner and have missed our
deadline please contact us on
01495 221630 and we will do our very best to help you out. We also
provide a same day delivery service within 20 miles of our depot subject to
Delivery Methods Explained
Orders within 10 miles of our depot will be delivered FREE OF
for a list of areas please see our delivery information
These are items below 1 metres in length. For example, Loft Doors,
Fittings, Dry Verge Units etc. If you require items that we would be able to
send through the standard royal mail, please phone us on 01495 221630 and we
will be happy to take your order over the telephone. We are able to send
items in the royal mail all over the UK at a low cost.
Below 3 metres in length
These are items below 3 metres in length but above 1.5 metres. For
example Skirting Boards, Interior wall cladding, shower panels et
Above 5 metres in length
These are any items above items above 3 metres in length.
Prices quoted for delivery are subject to VAT
CollectionCollection is Free of charge, please choose Collect in store and we will have it ready for you to collect.
If you have any queries regarding delivery please do not hesitate to contact.
Each Linear Verge Unit should be fixed using aluminium or stainless steel,
3.35mm shank diameter spiral roll or annular shank nails, 38mm in length (these
are not provided).
The Linear Verge Units should be used in conjunction with an additional 25mm
x 38mm batten strip securely fixed along the verge of the roof. Alternatively,
they can be fixed directly onto the ends of the tiling battens if these are in
good condition (may require sawing each Linear Verge Unit to align with batten
At the eaves, the initial Verge Unit should be secured using an additional
Fixing Clip ( Product Code: MAN-GDV-FC). For roofs where the bottom course tiles
are tilted upwards, a joint can be made with an additional Verge Union (Product
At the ridge, the Angled or Round Ridge End Cap (Product Code: MAN-GDV-END-A
or MAN-GDV-END-R) should be used to prevent the ingress of birds and large
Building Plastics (Wales) Limited, Unit 1, Block E, Penmaen Industrial Estate, Pontllanfraith, Blackwood. NP12 2DQTelephone : 01495 221 630
Incorporated in England and Wales. Company No 07681432 VAT No GB 191 9222 96